Data Type API#

The standard array can have 24 different data types (and has some support for adding your own types). These data types all have an enumerated type, an enumerated type-character, and a corresponding array scalar Python type object (placed in a hierarchy). There are also standard C typedefs to make it easier to manipulate elements of the given data type. For the numeric types, there are also bit-width equivalent C typedefs and named typenumbers that make it easier to select the precision desired.

Warning

The names for the types in c code follows c naming conventions more closely. The Python names for these types follow Python conventions. Thus, NPY_FLOAT picks up a 32-bit float in C, but numpy.float_ in Python corresponds to a 64-bit double. The bit-width names can be used in both Python and C for clarity.

Enumerated Types#

enumerator NPY_TYPES#

There is a list of enumerated types defined providing the basic 24 data types plus some useful generic names. Whenever the code requires a type number, one of these enumerated types is requested. The types are all called NPY_{NAME}:

enumerator NPY_BOOL#: The enumeration value for the boolean type, stored as one byte. It may only be set to the values 0 and 1.

enumerator NPY_BYTE#

enumerator NPY_INT8#: The enumeration value for an 8-bit/1-byte signed integer.

enumerator NPY_SHORT#

enumerator NPY_INT16#: The enumeration value for a 16-bit/2-byte signed integer.

enumerator NPY_INT#

enumerator NPY_INT32#: The enumeration value for a 32-bit/4-byte signed integer.

enumerator NPY_LONG#: Equivalent to either NPY_INT or NPY_LONGLONG, depending on the platform.

enumerator NPY_LONGLONG#

enumerator NPY_INT64#: The enumeration value for a 64-bit/8-byte signed integer.

enumerator NPY_UBYTE#

enumerator NPY_UINT8#: The enumeration value for an 8-bit/1-byte unsigned integer.

enumerator NPY_USHORT#

enumerator NPY_UINT16#: The enumeration value for a 16-bit/2-byte unsigned integer.

enumerator NPY_UINT#

enumerator NPY_UINT32#: The enumeration value for a 32-bit/4-byte unsigned integer.

enumerator NPY_ULONG#: Equivalent to either NPY_UINT or NPY_ULONGLONG, depending on the platform.

enumerator NPY_ULONGLONG#

enumerator NPY_UINT64#: The enumeration value for a 64-bit/8-byte unsigned integer.

enumerator NPY_HALF#

enumerator NPY_FLOAT16#: The enumeration value for a 16-bit/2-byte IEEE 754-2008 compatible floating point type.

enumerator NPY_FLOAT#

enumerator NPY_FLOAT32#: The enumeration value for a 32-bit/4-byte IEEE 754 compatible floating point type.

enumerator NPY_DOUBLE#

enumerator NPY_FLOAT64#: The enumeration value for a 64-bit/8-byte IEEE 754 compatible floating point type.

enumerator NPY_LONGDOUBLE#: The enumeration value for a platform-specific floating point type which is at least as large as NPY_DOUBLE, but larger on many platforms.

enumerator NPY_CFLOAT#

enumerator NPY_COMPLEX64#: The enumeration value for a 64-bit/8-byte complex type made up of two NPY_FLOAT values.

enumerator NPY_CDOUBLE#

enumerator NPY_COMPLEX128#: The enumeration value for a 128-bit/16-byte complex type made up of two NPY_DOUBLE values.

enumerator NPY_CLONGDOUBLE#: The enumeration value for a platform-specific complex floating point type which is made up of two NPY_LONGDOUBLE values.

enumerator NPY_DATETIME#: The enumeration value for a data type which holds dates or datetimes with a precision based on selectable date or time units.

enumerator NPY_TIMEDELTA#: The enumeration value for a data type which holds lengths of times in integers of selectable date or time units.

enumerator NPY_STRING#: The enumeration value for ASCII strings of a selectable size. The strings have a fixed maximum size within a given array.

enumerator NPY_UNICODE#: The enumeration value for UCS4 strings of a selectable size. The strings have a fixed maximum size within a given array.

enumerator NPY_OBJECT#: The enumeration value for references to arbitrary Python objects.

enumerator NPY_VOID#: Primarily used to hold struct dtypes, but can contain arbitrary binary data.

Some useful aliases of the above types are

enumerator NPY_INTP#: The enumeration value for a signed integer type which is the same size as a (void *) pointer. This is the type used by all arrays of indices.

enumerator NPY_UINTP#: The enumeration value for an unsigned integer type which is the same size as a (void *) pointer.

enumerator NPY_MASK#: The enumeration value of the type used for masks, such as with the NPY_ITER_ARRAYMASK iterator flag. This is equivalent to NPY_UINT8.

enumerator NPY_DEFAULT_TYPE#: The default type to use when no dtype is explicitly specified, for example when calling np.zero(shape). This is equivalent to NPY_DOUBLE.

Other useful related constants are

NPY_NTYPES#: The total number of built-in NumPy types. The enumeration covers the range from 0 to NPY_NTYPES-1.

NPY_NOTYPE#: A signal value guaranteed not to be a valid type enumeration number.

NPY_USERDEF#: The start of type numbers used for Custom Data types.

The various character codes indicating certain types are also part of an enumerated list. References to type characters (should they be needed at all) should always use these enumerations. The form of them is NPY_{NAME}LTR where {NAME} can be

BOOL, BYTE, UBYTE, SHORT, USHORT, INT, UINT, LONG, ULONG, LONGLONG, ULONGLONG, HALF, FLOAT, DOUBLE, LONGDOUBLE, CFLOAT, CDOUBLE, CLONGDOUBLE, DATETIME, TIMEDELTA, OBJECT, STRING, VOID

INTP, UINTP

GENBOOL, SIGNED, UNSIGNED, FLOATING, COMPLEX

The latter group of {NAME}s corresponds to letters used in the array interface typestring specification.

Defines#

Max and min values for integers#

NPY_MAX_INT{bits}, NPY_MAX_UINT{bits}, NPY_MIN_INT{bits}: These are defined for {bits} = 8, 16, 32, 64, 128, and 256 and provide the maximum (minimum) value of the corresponding (unsigned) integer type. Note: the actual integer type may not be available on all platforms (i.e. 128-bit and 256-bit integers are rare).
NPY_MIN_{type}: This is defined for {type} = BYTE, SHORT, INT, LONG, LONGLONG, INTP
NPY_MAX_{type}: This is defined for all defined for {type} = BYTE, UBYTE, SHORT, USHORT, INT, UINT, LONG, ULONG, LONGLONG, ULONGLONG, INTP, UINTP

Number of bits in data types#

All NPY_SIZEOF_{CTYPE} constants have corresponding NPY_BITSOF_{CTYPE} constants defined. The NPY_BITSOF_{CTYPE} constants provide the number of bits in the data type. Specifically, the available {CTYPE}s are

BOOL, CHAR, SHORT, INT, LONG, LONGLONG, FLOAT, DOUBLE, LONGDOUBLE

Bit-width references to enumerated typenums#

All of the numeric data types (integer, floating point, and complex) have constants that are defined to be a specific enumerated type number. Exactly which enumerated type a bit-width type refers to is platform dependent. In particular, the constants available are PyArray_{NAME}{BITS} where {NAME} is INT, UINT, FLOAT, COMPLEX and {BITS} can be 8, 16, 32, 64, 80, 96, 128, 160, 192, 256, and 512. Obviously not all bit-widths are available on all platforms for all the kinds of numeric types. Commonly 8-, 16-, 32-, 64-bit integers; 32-, 64-bit floats; and 64-, 128-bit complex types are available.

Integer that can hold a pointer#

The constants NPY_INTP and NPY_UINTP refer to an enumerated integer type that is large enough to hold a pointer on the platform. Index arrays should always be converted to NPY_INTP , because the dimension of the array is of type npy_intp.

C-type names#

There are standard variable types for each of the numeric data types and the bool data type. Some of these are already available in the C-specification. You can create variables in extension code with these types.

Boolean#

type npy_bool#: unsigned char; The constants NPY_FALSE and NPY_TRUE are also defined.

(Un)Signed Integer#

Unsigned versions of the integers can be defined by pre-pending a ‘u’ to the front of the integer name.

type npy_byte#: char

type npy_ubyte#: unsigned char

type npy_short#: short

type npy_ushort#: unsigned short

type npy_int#: int

type npy_uint#: unsigned int

type npy_int16#: 16-bit integer

type npy_uint16#: 16-bit unsigned integer

type npy_int32#: 32-bit integer

type npy_uint32#: 32-bit unsigned integer

type npy_int64#: 64-bit integer

type npy_uint64#: 64-bit unsigned integer

type npy_long#: long int

type npy_ulong#: unsigned long int

type npy_longlong#: long long int

type npy_ulonglong#: unsigned long long int

type npy_intp#: Py_intptr_t (an integer that is the size of a pointer on the platform).

type npy_uintp#: unsigned Py_intptr_t (an integer that is the size of a pointer on the platform).

(Complex) Floating point#

type npy_half#: 16-bit float

type npy_float#: 32-bit float

type npy_cfloat#: 32-bit complex float

type npy_double#: 64-bit double

type npy_cdouble#: 64-bit complex double

type npy_longdouble#: long double

type npy_clongdouble#: long complex double

complex types are structures with .real and .imag members (in that order).

Bit-width names#

There are also typedefs for signed integers, unsigned integers, floating point, and complex floating point types of specific bit- widths. The available type names are

npy_int{bits}, npy_uint{bits}, npy_float{bits}, and npy_complex{bits}

where {bits} is the number of bits in the type and can be 8, 16, 32, 64, 128, and 256 for integer types; 16, 32 , 64, 80, 96, 128, and 256 for floating-point types; and 32, 64, 128, 160, 192, and 512 for complex-valued types. Which bit-widths are available is platform dependent. The bolded bit-widths are usually available on all platforms.

Printf Formatting#

For help in printing, the following strings are defined as the correct format specifier in printf and related commands.

NPY_LONGLONG_FMT#

NPY_ULONGLONG_FMT#

NPY_INTP_FMT#

NPY_UINTP_FMT#

NPY_LONGDOUBLE_FMT#

System configuration

Array API